END-OF-WORK CLEANING
PORCELAIN TILES, GLAZED CERAMIC TILES, ACID-RESISTANT STONE SURFACES, TERRACOTTA, QUARRY TILES
Biodegradable, with plant-derived surfactants.
Buffered acid: exerts a controlled and effective action over time, does
not release dangerous fumes during use.
COVERAGE
APPROXIMATE COVERAGE AND DILUTION (1 litre):
- Terracotta 1:510/20 m²
- Porcelain tiles 1:540 m²
- Natural stone 1:5-1:1020/35 m²
- The coverage is purely indicative
Packaging
1 litre: boxes of 12.
5 litres: boxes of 4.
WARNINGS
- Keep out of reach of children.
- Do not disperse into the environment after use.
TEMPERATURES
- Storage temperature: from 5° to 30° C.
- The product should be applied to materials with temperature between 5° and 30°C.
WHAT IT’S FOR
- Detergent for end-of-installation washing
- Removes post-application deposits and building-site dirt.
- Eliminates saline efflorescences from terracotta.
- Eliminates lime-scale from floors, showers, bathroom fittings.
- Thoroughly cleans outdoor floors.
- It removes deposits and cleans at the same time because it also contains surfactants.
- Effective against rust stains.
- It helps to remove signs of engobing on ceramic and porcelain tiles surfaces
ADVANTAGES
- Buffered acid, does not produce harmful fumes for the user and the environment: it does not contain hydrochloric acid.
- Does not change the appearance or colour of materials.
- It cleans but does not attack.
- Does not affect grouting.
- Does not ruin profiles or items in aluminium and steel (kitchen hoods, pipes...).
- Can be used on many surfaces, terracotta, porcelain and ceramic tiles, and acid resistant stone.
- Has many functions: it can clean and remove deposits according to dilution.
- It is also effective in removing grout residues.
HOW TO USE IT
Dilution: between 1:5 and 1:10 according to the level of dirt to be removed.
Application:
- For washing after laying and for end-of-work cleaning: wet the surface well with water before washing. Then use DETERDEK PRO diluted at a ratio of 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water). Apply the solution a few square metres at a time, then add, allow contact time of 5 minutes, then work with a single disc cleaner or large brush. Remove any residues using a cloth or liquid vacuum cleaner and rinse with abundant water. Should any stubborn dirt residues remain, repeat the wash with more concentrated solutions.
- For extraordinary maintenance on outdoor surfaces with clear signs of ageing (smog, dust…)): dilute 1 litre of product in 10 litres of water. Then follow the same application procedures described above.
Caution:
Do not use on polished marble or on any materials that are sensitive to acids.
Before using on this material, carry out a test on a small surface area to check that it is actually resistant to the product.
For items in aluminium, follow the instructions and use a soft sponge.
Before using on this material, carry out a test on a small surface area to check that it is actually resistant to the product.
For items in aluminium, follow the instructions and use a soft sponge.