EXTREME ECO-COMPATIBLE
WATER- AND OIL-REPELLENT
PROTECTION
POLISHED PORCELAIN TILES, MARBLE
AND GRANITE, NATURAL STONE AND
AGGLOMERATES, CONCRETE
Thanks to the innovative ULTIMATE SHIELD TECHNOLOGY, developed
in the FILA research laboratories, the product can be applied in the
presence of residual humidity, a mere 24 hours after the initial wash.
COVERAGE
APPROXIMATE COVERAGE (1 litre):
- polished porcelain tiles30-50 m²
- Polished Marble/Granite20-30 m²
- Matte honed stone10-20 m²
- “Coverage shown is for guidance purposes only and refers to single coats”
Packaging
375 ml: boxes of 12.
1 litre: boxes of 6.
5 litres: boxes of 4.
WARNINGS
- Keep out of reach of children.
- Do not disperse into the environment after use.
- Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compa- tibility with sub-zero temperatures.
- Ventilate the premises well during use and while the product is drying.
- Does not protect against acidic aggression.
TEMPERATURES
- Storage temperature: from 5° to 30°C.
- This product must be applied to surfaces with temperature between 10°C and 30°C.
WHAT IT’S FOR
- Water- and oil-repellent with natural finish.
- The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes.
- Reduces absorption without affecting the material’s natural look.
- It waterproofs, protects and facilitates cleaning.
- It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resinmarble, and stone slabs.
- Is also suitable for treating coloured cement tiles and manufactured stones.
- It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
- Water- and oil-repellent: it hampers the absorption of common watery and oily stains.
ADVANTAGES
- Free of hydrocarbon solvents: eco-friendly treatment
- Being a water-based product, it withstands residual humidity conditions and can therefore be applied 24–48 hours after the initial wash, thus speeding up the treatment
- Single-coat application: apply the product and rub it gently over the surface until it is completely absorbed
- Does not form surface film and does not yellow
- Ideal for protecting tables, as well as kitchen and bathroom tops
- The surface can be walked on after just 2 hours**.
- A product with an extremely low VOC and a low environmental impact; it also has the INDOOR AIR COMFORT GOLD certificate*
**Application conditions: temperature = 20°C • humidity < or = 60% Apply according to the indications shown on the label.
* A product with an extremely low VOC and a low environmental impact; it also has the INDOOR AIR COMFORT GOLD certificate. The product has passed the applicable stringent requirements and conforms to all compulsory national standards (for example: FrenchA+, CAM Edilizia, Belgian Regulation, AgBB, etc.) as well as innovative environmental sustainability criteria, such as LEED, BREEAM, WELL. For further information consult www.filasolutions.com/ita/azienda/ricerca-e-sviluppo
HOW TO USE IT
No dilution required: ready to use.
Application:
- Shake before use. For materials with matt finish (natural stone, terracotta, agglomerates, concrete tiles): Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.
- For polished porcelain tiles, natural stone, agglomerates with glossy finish: Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.
- To complete the cycle with the finish: On porous materials such as natural stone, reconstructed tiles, agglomerates and concrete tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE). The surface can be walked on after just 2 hours. Water- and oil-repellent protection takes effect after 24 hours. Maintenance: use a diluted solution of CLEANER PRO.
Caution:
Before applying to the entire surface, test the product on a small area to check for
colour changes.
Do not apply the product externally if rain is forecast.
Does not protect against acidic aggression.
Do not apply the product externally if rain is forecast.
Does not protect against acidic aggression.