PROFESSIONAL DEGREASING CLEANING AGENT
PORCELAIN TILES, UNPOLISHED STONE AND AGGLOMERATES, GLAZED CERAMIC TILES, CONCRETE, LINOLEUM AND PVC, TERRACOTTA, QUARRY TILES
A concentrated detergent effective against stratified oiliness:
A unique and innovative formula from the FILA research laboratories,
encompassing all the professional degreasing power without caustic
soda or ammonia.
COVERAGE
APPROXIMATE COVERAGE AND DILUTION (1 litre):
- Maintenance 1:20200 m²
- Wax removal 1:520 m²
- Initial stone wash 1:530 m²
- “Coverage shown is for guidance purposes only and refers to single coats”
Packaging
1 litre: boxes of 12.
5 litres: boxes of 4.
WARNINGS
- Keep out of reach of children.
- Do not disperse into the environment after use.
TEMPERATURES
- Storage temperature: from 5° to 30° C.
- The product should be applied to materials with temperature between 5° and 30°C.
WHAT IT’S FOR
- When diluted, it cleans and removes grease from dirty floors in porcelain tiles, ceramics, natural stone, terracotta and concrete.
- When undiluted, it removes stubborn stains from porcelain floor tiles.
- Excellent for basic cleaning of natural stones that are sensitive to acids.
- Ideal for basic cleaning of concrete surfaces.
- Wax-remover for water-based, metallic and re-polishable waxes.
- Eliminates pre-treatment residues from polished porcelain tiles.
ADVANTAGES
- Contains biodegradable ingredients
- A 3-in-one product: cleaner, stain-remover, wax-remover
- The only one that can eliminate stubborn stains from porcelain tiles.
- It cleans but does not attack.
- Extremely easy to use.
HOW TO USE IT
Dilution: according to use
- For cleaning and degreasing all surfaces. Dilute in water (1:10-1:20) and apply on the surface. Leave to act for 4-5 minutes before brushing with a single-disc floor scrubber or scrubbing brush. Use a cloth or liquid vacuum cleaner to clean any residues and then rinse thoroughly.
- For a more vigorous cleaning, dilute 1:5. To remove stains from porcelain tiles: Pour undiluted onto the stain and the entire tile. Leave to act until fully dry, then wash and rinse the surface.
- To remove wax: Dilute 1:5, apply on the surface and leave to act for 10 minutes. Clean using a scrubbing brush or single-disc floor scrubber. Use a cloth or liquid vacuum cleaner to clean any residues and then rinse thoroughly.
Caution:
- Do not use on new marble or polished stone.
- Do not use on wood.
- Do not use on methacrylate tubs.
- Linoleum: carry out a spot test beforehand to check colour fastness