Porcelain tiles are strong, beautiful, and very popular in homes and offices. But even porcelain tiles can get stained. Oil spills, water marks, food stains, and daily dirt can slowly spoil their look.

To keep tiles safe and easy to clean, you need proper protection. That protection comes from FILA MP90 Eco Xtreme.

Many people feel nervous about using a tile protector for the first time. The good news is that using FILA MP90 is simple. You just need to follow the right steps.

This guide will explain everything in a very easy way.

Why use FILA MP90 on porcelain tiles?

Before we start with the steps, let’s understand the reason.

FILA MP90 creates an invisible shield on porcelain tiles. This shield:

• Stops water and oil from going inside the tile
• Prevents tough stains
• Makes daily cleaning easier
• Keeps the natural look of the tile

It does all this without changing the color, shine, or finish of the tiles.

Now let’s move to the actual process.

Step 1 – Clean the tiles properly

The first step is very important. The surface must be completely clean before applying FILA MP90.

• Wash the tiles well to remove dust and dirt
• Make sure there is no grease or residue on the surface
• Clean the grout lines carefully
• Let the floor dry fully

Never apply the product on a dirty surface. If you do, the dirt can get trapped under the protection layer.

Step 2 – Make sure the tiles are dry

Porcelain tiles should be clean and dry before treatment. If the tiles are newly installed, wait at least 24-48 hours after the first wash.

This waiting time allows moisture to reduce so the product can work properly.

Step 3 – Get the product ready

FILA MP90 is very easy to use because:

• It is ready to use
• No mixing with water is needed
• No dilution is required

Just shake the bottle well before application.

Step 4 – Apply FILA MP90 evenly

Now comes the main part.

• Take a brush or fleece pad
• Pour a small amount of FILA MP90 on the surface
• Spread it evenly on the tiles
• Make sure you also cover the grout lines

Apply the product in a smooth and continuous way. Do not leave dry spots.

Step 5 – Help the product go inside

On polished porcelain tiles, you need one extra small step.

After applying the product:

• Please wait for 10 minutes to 15 minutes
• Take a microfibre cloth
• Lightly rub the surface with the same product

Step 6 – Remove the extra product

Do not let excess product dry on the surface.

• Use a clean cloth
• Wipe away any leftover liquid
• Leave the surface clean and dry

Step 7 – Let it dry

After application:

• You can walk on the tiles after about 2 hours
• Full water and oil protection starts after 24 hours

Don’t clean a lot or spill liquids during this time.

Step 8 – Maintain the tiles

After treating the tiles with FILA MP90, maintenance becomes very easy.

For normal cleaning:

• Use a mild cleaner diluted with water
• Avoid strong acidic cleaners
• Wipe spills quickly for best results

With simple care, the protection lasts for a long time.

The Bottom Line

Always test FILA MP90 on a small hidden area first. This helps you check the result before treating the full surface.

You can easily keep your porcelain tiles looking new for years by following these simple steps. It’s not hard at all to use FILA MP90. It’s just a smart way to take care of your pretty floors.

Frequently Asked Question

1. Do I need to dilute FILA MP90 before using it?

No. FILA MP90 is ready to use. You apply it directly from the bottle without mixing it with water.

2. Can I apply FILA MP90 right after tile installation?

You should wait at least 24-48 hours after the first wash of new tiles. This gives enough time for residual moisture to reduce.

3. Will FILA MP90 change the shine or color of my porcelain tiles?

No. FILA MP90 does not change the look of tiles. It protects them while keeping their natural finish exactly the same.