If you work with natural stone, marble, granite, or terrazzo, you have probably run into the same problem. A chip, a crack, a broken edge, and no adhesive that holds it cleanly without leaving an ugly yellow stain across a light-colored surface.

Akepox 5010 solves that problem. It is a two-component epoxy adhesive made by AKEMI, a German manufacturer with decades of experience in stone industry products. Professionals across the construction and stone fabrication industries use it because it works consistently, bonds strongly, and stays nearly invisible on light stone surfaces.

This guide covers what Akepox 5010 actually does, where it performs best, and how to use it correctly.

What Akepox 5010 Is and Why It Stands Out

Akepox 5010 is a solvent-free, gel-like, two-component epoxy adhesive. It mixes at a 2:1 ratio – two parts Component A to one part Component B – and cures into a rigid, weather-resistant bond.

What makes it different from standard construction adhesives is the color stability. Most epoxy systems yellow significantly over time, which makes them useless on white marble or pale limestone. Akepox 5010 is specifically formulated to minimize this yellowing, making it suitable for light-colored and white natural stone where a stained joint would ruin the finish.

It also carries an emission class A+ rating, is certified food-safe once fully cured, and contains no solvents. Those properties matter in applications like kitchen countertops, food preparation surfaces, and public spaces where material standards are strictly enforced.

Where Akepox 5010 Is Used Most

Natural Stone Fabrication and Installation

This is the core application. Akepox 5010 bonds marble, granite, limestone, quartzite, and engineered stone in both interior and exterior settings. Fabricators use it for face joints, mitre joints, and edge bonding during worktop and countertop installation.

It works on vertical surfaces without slumping because of its gel-like, knife-grade consistency. That makes it suitable for facade bonding, wall cladding, and other applications where a runny adhesive would cause problems.

Stone Repair and Crack Filling

Chips and cracks in stone surfaces are common on job sites and in occupied buildings. Akepox 5010 handles both. Its paste-like texture allows it to fill voids and irregular gaps without running out before it cures.

For repairs on light or white stone, the low-yellowing formula keeps the repair visually clean. Colour pastes compatible with Akepox 5010 allow further colour matching when the stone shade needs to be replicated more precisely.

Restoration Work on Monuments and Facades

Preservation and restoration professionals rely on Akepox 5010 for its weather resistance and long working time. At 20°C, the mixed adhesive stays workable for 20 to 30 minutes — enough time to position and adjust stone components before the bond sets.

It bonds well to slightly damp surfaces, which is a practical advantage when working outdoors on existing stone structures. The cured bond resists water, salt water, petrol, diesel oil, and lubricating oil, making it suitable for exposed outdoor applications including paving, garden features, and facade restoration.

Terrazzo, Ceramics, and Engineered Materials

Akepox 5010 is not limited to natural stone. It bonds terrazzo, ceramics, porcelain, concrete ashlar, glass, PVC, acrylic, and wood. This versatility makes it a useful single adhesive for projects that combine different materials, rather than requiring a separate product for each substrate.

How to Use Akepox 5010 Correctly

Getting the best result from Akepox 5010 depends on surface preparation and accurate mixing. Neither step should be rushed.

Surface Preparation

Clean both surfaces thoroughly before applying the adhesive. Remove dust, grease, old adhesive residue, and any loose material. Lightly roughen the surfaces with sandpaper or an abrasive pad to improve mechanical adhesion. Allow wet surfaces to dry where possible, although the product tolerates slight dampness.

Mixing

Akepox 5010 is available in cans and cartridges.

For the can format, mix two parts Component A with one part Component B by weight or volume until the mixture reaches a uniform, consistent colour throughout. Do not undermix. An inconsistent blend will not cure properly.

For the cartridge format, load the cartridge into the appropriate gun, work the grip until material emerges from both ports, then attach the mixing nozzle. The nozzle mixes the components automatically as you dispense.

Application and Curing

Apply the mixed adhesive to one surface only. Press the surfaces together firmly and hold or clamp them until the bond is stable enough to support itself.

Key curing milestones at 20°C:

• 6 to 8 hours: bonded parts can be moved;
• 12 to 16 hours: parts can be further processed and tooled;
• 7 days: maximum strength is reached.

Curing is faster in warmer temperatures and slower in cold conditions. In hot climates like the UAE, working time at 30°C reduces to 10 to 15 minutes and at 40°C to 5 to 10 minutes. Plan accordingly and work in manageable batches.

Clean tools with AKEMI Nitro-Dilution before the adhesive cures. Once cured, the bond is permanent and cannot be dissolved.

Technical Data at a Glance

Where to Get Akepox 5010 in Dubai, UAE, and Beyond

CretePro Building Material Trading LLC supplies construction adhesives, stone repair products, and building chemicals to contractors, fabricators, and developers across Dubai, UAE, Saudi Arabia, Kenya, Nairobi, Kenya, Uganda, Qatar, Oman, Bahrain, Kuwait, Egypt, Tanzania, Ethiopia, Nigeria, and South Africa. Browse the full range of construction chemical products or get in touch directly to discuss your project requirements and product availability.

Frequently Asked Questions

What surfaces does Akepox 5010 bond to?

Akepox 5010 bonds to a wide range of materials, including natural stone such as marble, granite, limestone, and quartzite, as well as engineered stone, terrazzo, ceramics, porcelain, concrete, glass, wood, PVC, and acrylic. It works on both interior and exterior surfaces and tolerates slightly damp conditions, which is useful for outdoor restoration and construction work. According to the AKEMI technical data sheet, silicate-bound stones bond better than carbonate-bound stones, so results may vary slightly depending on the specific stone type.

How long does Akepox 5010 take to cure fully?

At 20°C, bonded parts can be moved after approximately 6 to 8 hours and further processed after 12 to 16 hours. Full maximum strength is reached after 7 days at 20°C. Temperature directly affects curing speed. In hotter conditions, curing accelerates significantly. At 30°C, working time drops to 10 to 15 minutes. At 40°C, it drops to just 5 to 10 minutes. In cold conditions below 10°C, working time extends to 60 to 70 minutes. Plan your mixing batch size based on the ambient temperature of the workspace.

Can Akepox 5010 be coloured to match stone?

Yes. Akepox 5010 accepts AKEMI colour pastes, which can be mixed in during preparation to match the shade of the stone being repaired or bonded. This is particularly useful for repair work where the adhesive joint needs to blend into the surrounding material. For outdoor applications, AKEMI recommends adding colour pastes regardless of the stone shade, as this helps conceal any minor yellowing that may develop over time with UV exposure. The maximum amount of color paste that can be added is specified in the product technical data sheet.

admin

Cretepro Building Material Trading LLC is the authorized importer, distributor and Trader of many well-known leading brands for Construction Chemicals, Building Maintenance and Allied products.