Kerakoll Fugabella Grout: Colours, Uses and Application Tips for a Flawless Finish
The grout joint is the smallest part of a tiled surface, yet it often decides how the whole installation looks after a few years. Discoloured, cracked or stained joints can make even premium porcelain look tired. That is why more designers and contractors in the UAE are specifying Kerakoll Fugabella grout for projects where appearance and durability matter equally.
In this guide, we explain what makes Fugabella different from standard cement grout, where it performs best and how to apply it for a clean, long-lasting finish.
What Is Kerakoll Fugabella Grout?
Kerakoll Fugabella Color is a decorative resin-cement grout for ceramic tiles, porcelain, mosaics and natural stone. It blends natural mineral binders with resin binders, giving it a performance profile that sits between a traditional cementitious grout and an epoxy grout.
It is classified CG2WA, meaning an improved cementitious grout with reduced water absorption and high abrasion resistance. According to Kerakoll, its performance in stain resistance, water repellence and colour uniformity comes close to that of reactive resin (epoxy) grouts, while remaining far easier to mix, spread and clean.
Key Benefits of Fugabella Grout
- 50 design colours: The range was developed with architect Piero Lissoni, offering everything from soft neutrals to deep, intense shades.
- No efflorescence: The formula is free of Portlandite and soluble salts, so joints stay clean without white salt deposits.
- Uniform colour: Mainly mineral pigments help the colour stay even across the floor and over time.
- Stain and water resistance: Lower absorption makes joints easier to clean in kitchens, bathrooms and busy commercial spaces.
- Wide joint range: Suitable for joints from 0 to 20 mm.
- Versatile use: Works on floors and walls, inside and outside, including pools and areas with underfloor heating.
Where Fugabella Grout Works Best
Because it handles both aesthetics and performance, Fugabella suits a wide range of projects:
- Bathrooms, showers and wet rooms
- Kitchens and food-service areas where stains are common
- Hotel lobbies, retail floors and other high-traffic spaces
- Terraces, balconies and pool surrounds exposed to sun and water
- Mosaic feature walls where colour precision matters
In wet areas, grout is only one part of the system. Make sure the substrate is protected with a proper waterproofing membrane before tiling begins.
Choosing the Right Fugabella Colour
Colour choice changes the character of a space. A tone-on-tone grout creates a near-seamless look that makes rooms feel larger, while a contrasting colour highlights tile patterns and geometry. If you are undecided, our article on whether grout should match or contrast with tiles walks through the pros and cons.
A practical tip: always test the grout on a spare tile and let it cure before final approval. Wet grout often looks darker than the final dry colour.
How to Apply Kerakoll Fugabella Grout
- Check the adhesive: Make sure the tiles are fully bonded and the adhesive has cured according to its data sheet. A strong bed, such as Kerakoll H40 Gel, gives the grout a stable base.
- Clean the joints: Remove spacers, dust and excess adhesive so the grout fills the full joint depth.
- Mix correctly: Add the powder to clean water and mix to a smooth, lump-free paste. Use the water ratio stated on the pack to protect colour consistency.
- Fill the joints: Apply diagonally across the tiles with a rubber float, pressing the grout firmly into the joints.
- Clean in time: Once the grout begins to firm up, clean with a damp sponge in circular motions, then finish with a light final wipe.
- Protect during curing: Keep the area free of heavy traffic and water until the grout has hardened.
Avoiding Common Grouting Problems
Most grout complaints come from poor cleaning or inconsistent mixing, not the product. Leaving residue on porcelain can cause a dull film, which is why many tilers follow up with Fila Deterdek for post-installation cleaning. For more on this, see what causes cement haze and how it is removed.
Remember to leave movement joints at perimeters and large floor areas, and seal them with a flexible colour-matched sealant rather than grout.
Conclusion
Kerakoll Fugabella grout gives contractors the clean look of designer grout with performance close to epoxy, but with the easy handling of a cement-based product. With 50 colours, no efflorescence and suitability for wet and high-traffic areas, it is a smart choice for both homes and commercial projects. Contact Crete Pro Trading for colour cards, technical guidance and supply across Dubai and the UAE.
Frequently Asked Questions
1. What type of grout is Kerakoll Fugabella?
Kerakoll Fugabella Color is a decorative resin-cement hybrid grout classified CG2WA. It combines natural mineral binders with resin binders for performance close to epoxy grout with the easy handling of a cement-based product.
2. How many colours does Kerakoll Fugabella grout come in?
Fugabella Color is available in 50 design colours developed with architect Piero Lissoni, ranging from soft neutrals to deep, intense shades.
3. Can Fugabella grout be used in showers and swimming pools?
Yes. Fugabella is suitable for internal and external use, including wet areas, swimming pools and fountains, as long as the substrate has been correctly waterproofed beforehand.
4. What joint width is Kerakoll Fugabella suitable for?
Fugabella Color is designed for grouting joints from 0 to 20 mm wide on ceramic tiles, porcelain, mosaics and natural stone.
5. Does Fugabella grout cause efflorescence?
No. The resin-cement formula is free of Portlandite and soluble salts, which removes the risk of the white salt and lime deposits often seen with standard cement grouts.

Cretepro Building Material Trading LLC is the authorized importer, distributor and Trader of many well-known leading brands for Construction Chemicals, Building Maintenance and Allied products.